Got A Question?

Contact Us

Whitley H35 Hypoxystation

The main features of the H35 Hypoxystation are listed below but if you require confirmation of any of these items, please contact us.

  • Control O2 in increments of 0.1% from 0.1% to 20% 
  • Control CO2 in increments of 0.1% from 0.1% to 15%
  • Control temperature precisely from 5°C above ambient up to 42°C
  • Control excess humidity up to 80% RH using cool plate technology (ambient conditions dependent)

Features

  • Straightforward calibration of gas sensors
  • Colour touch-screen interface which allows you to monitor all parameters simultaneously.
  • Built-in airlock designed to provide effective transfer of pipettes, cell ware and other similar sized items to and from the workstation environment in the fastest possible time.
  • USB port to facilitate download of data for further analysis.
  • Patented, ergonomic gloveports allowing gloved or bare hand working
  • Gas mixing via a fully integrated control system to rapidly create and maintain your selected environmental conditions.

A range of options are also available so that your Hypoxystation can be tailored to the needs of your particular research project. Please visit our Options page to see if any of these additional items are of interest to you.

Details

With accurate control of oxygen and other parameters, and the ability to manipulate cells in situ, cell biology research can be performed over a comprehensive range of oxygen tensions.

  • Control O2 in increments of 0.1% from 0.1% to 15% 
  • Control CO2 in increments of 0.1% from 0.1% to 15% 
  • Control temperature precisely from 5°C above ambient up to 42°C
  • Control excess humidity up to 80% RH using cool plate technology (ambient conditions dependent)

The full colour, touch-screen enables you to set, monitor and adjust parameters to ensure precise control over the conditions you require throughout the incubation and working areas. The display is very easy to use.

The H35 Hypoxystation comes complete with an integrated 12 litre rapid-cycle airlock to facilitate the introduction of samples into the workstation environment.

Gas mixing on this unit is achieved via a fully integrated control system which enables you to rapidly create your selected environmental conditions.

Every aspect of system functionality has been thoroughly considered - integral airlock, environmental control systems, touch screen control panel, workspace visibility, fabrication quality and the patented gloveport system.

This product was designed and manufactured in conjunction with cell biology researchers to ensure ultimate performance combined with user comfort, convenience and reliability.

A range of options are also available so that your Hypoxystation can be tailored to the needs of your particular research project. Please visit our Hypoxystation Accessories page to see if any of these additional items are of interest to you.

View Specifications

Specifications

Capacity (Litres) 300 litres
Airlock Size 12 litres / Accommodates up to 44 x 96 well plates or 84 x T25 culture flasks or 8 x T175 culture flasks
Porthole System Manual
Gas Supplies CO2/Air/N2
Footswitch Wireless
Auto Sleeve Gassing Option available
Internal Mains Socket Option available
Inspection Lamp Not applicable
Single Sample Entry Option available
AN02 Conditions Monitor Not applicable
Refrigeration Not applicable
Data Logging Option available
Airlock Cycle Time 60 Seconds
Extra Cable Glands Option available
Microscope Option available
Automatic Dehumidifier Fitted as standard
Automatic Humidifier Option available
Removable Front Option Available
Trolley Option Available
Dimensions (w/d/h - mm) 1255 / 720 / 710
Weight (lbs/kg) 231 / 105
O2 Profiling Option available
CO2 Monitoring Option available
Vacuum Take-off Option available
Temperature Range 5°C above ambient up to 45°C
Touchscreen Control Yes

Accessories

All accesssories can be purchased at the Don Whitley Scientific main site.

A02643 Anotox(TM) Sachet Cradle

A02945 Spare Cable Gland

A04348 Footswitch

A04553 Stainless Steel Catalyst Holder

A06100 CO2 Monitoring

A06101 Removable Front

A06102 Vacuum Take-off Port

A06103 15cm Single Plate Entry System (Letterbox)

A06104 Humidification System

A06106 Double Internal Power Socket

A06107 Gas Sample Port

A06108 Data Logging with Oxygen Profiling

A06109 Data Logging

A06110 H35 Hypoxystation Trolley

A06114 Internal Storage Tray (maximum 2 per unit)

A06116 Automatic Sleeve Gassing System

A06126 Zeiss Primo Vert Digital Inverted Microscope

A06129 JuLI Cell Analyser

A07208 Front Loading 9cm Letterbox


Consumables

Clicking the links below will take you to the consumables on the Don Whitley Scientific main site.

A00069 Drylube Powder
A01923 Foam Cleanser (UK Only)
A02128 Evaporator Paper (Fan)
A02129 Anotox Sachet
A02672 Sleeve Retaining O'Ring
A02715 Workstation PVC Sleeve
A02716 Plastic Sleeve Cuff Ring
A02820 Sleeve Kit with Latex Wrist Seal
A02821 Latex Wrist Seals
A02830 Sleeve Kit with Neoprene Wrist Seal (Standard)
A02831 Neoprene Wrist Seal (Standard)
A02840 Sleeve Kit with Neoprene Wrist Seal (Large)
A02841 Neoprene Wrist Seal (Large)
A02855 Wrist Seal O'Ring
A03120 Catalyst Recharge
D00003 Labdet 100
A02535 Tray Pushrod
A04264 Airlock Transfer Tray for A35, A45 and H35 Workstations
A03780 Storage Rack
A06928 Storage Rack with Trays
A03912 Whitley Gas Bottle Holder
A00202 Neoprene Gauntlets
A00118 Latex Gauntlets

Images

Videos